Installing Bootmii as boot2 requires the presence of a vulnerability in boot1 called the trucha bug. The trucha bug was fixed sometime in the 1st quarter of 2008. This means any Wii manufactured after the cut off date is not compatible with boot2 Bootmii and can only have Bootmii installed as IOS.
North America List LU Serial Numbers (Ranges)
LU10305 - LU10954 - Compatible
LU1124 - LU1511 - Incompatible
LU304 - LU34428 - Compatible
LU3535 - LU4054 - Incompatible
LU5065 - LU5796 - Compatible
LU5880 - LU7400 - Incompatible
LEH, LEM, LEF, LAH, LJF, LKM Serial numbers
Source: Bootmii Boot2 Compatibility List
Showing posts with label softmod. Show all posts
Showing posts with label softmod. Show all posts
Wednesday, May 4, 2011
Tuesday, May 3, 2011
Korean 003 Error Fix Unauthorized Device Detected
Smash Stack PAL/KOR Has Been Released!
What does this mean for your 003 wii? It can be fixed.
What you will need, 1:1 iso of SSBB-PAL
A game that installs a channel or A game that reboots to the safety screen
What you will do, load SSBB-PAL on your 4.2/4.3u/e/j 003 bricked wii
How will you load SSBB-PAL on your U/J wii? You will use Giantpunes mariokart pawns method.
A gamecube controller
A dvd drive capable of reading burned disc, or a wode (new wii dvd drives will not work, you may need to replace it.)
A modchip or a wode
Error 003 is caused by system menu 4.2/4.3+ and ios70/80 on region changed Korean wiis
The FIX- You need to install ios60-v6174 into ios slot 70, 80, 90. Then Never ever update from Nintendo again. Be sure to install priiloader to block updates. If you follow my softmod guide, your wii will be fixed when your done. Alternatively, you can use modmii to install the need patched ios.
Download- Smash-Stack.zip
Extract to a formated standard SD card 1-2g
SDHC will not work
4.2/4.3u 003 wiis- Download error 003-USA.zip
-Extract to your pc in folder 03
-Do MarioKart-PWNS or SwapDisc-PWNS
4.2/4.3j 003 wiis- Download error 003-JAPAN.zip
-Extract to your pc in folder 03
-Do MarioKart-PWNS or SwapDisc-PWNS
4.2/4.3e 003 wiis- Patch your SSBB-PAL.iso to autoboot with bootme
-Autoboot SSBB-PAL and run the smash stack.
-Hackmii loads, install HBC, bootmii, make a nand backup
-follow my Guide: Softmod Any Wii to fix
Mario Kart PWNS
This will allow you to load Smash Stack PAL on a non pal wii
You can do this via channel install
What you need-
A game in the region of your wii
The game must install a channel, that is not currently installed on your wii
Games that install channels- Mario Kart, Wii Fit, Rabbids Go Home
Mario Kart- tested and working
Wii Fit- not working for me
Rabbids Go Home- not working for me
Copy your Super Smash Bros. Brawl PAL ISO to folder /003
Copy your channel installing game to folder /003
Navigate to folder /003
Rename your Super Smash Bros. Brawl PAL ISO -> ssbb-pal.iso
Rename your channel installing game -> channel.iso
Run MarioKart-PWNS.bat
Let wit do its thing
Code:
wit mix channel.iso channel.iso ignore "@ignore.txt" select DATA as chan --dest disc1.iso --overlay
wit edit disc1.iso --id=0SBE01 --name "MarioKart-PWNS" --region USA --modify=DISC
wit mix disc1.iso header region ignore "@ignore.txt" ssbb-pal.iso select DATA as chan --dest disc2.iso --overlay
Burn on good Media. Dual Layer media for ssbb-pal.iso, such as verbatim dvd + or minus. I have had good luck with verbatim dl dvd +r 8x and verbatim dl dvd -r 2.4x.
Burn with ImgBurn, @ 4x set the layer break to - 2084960
Burn disc1.iso on a good dvd5 disc
Burn disc2.iso.iso on a good dvd9 dual layer disc
Use a gc controller to enter recovery menu via savemiifrii
Insert the channel disc, the game boots
Use your wiimote and navigate to the channel installer. Select to install the channel, it will tell you this channel uses so many block. When you get to the install confirmation, press [HOME] on the wiimote, eject disc1, insert disc2, press [HOME] on the wiimote, install the channel-
Super Smash Bros Brawl- VC demo menu will load, press [HOME] again, restart-
SSBB strap screen loads. Make a savegame.
Go to the stage builder, delete any custom stages you may have go back to the main title screen
Insert a standard sd card, 1-2g, non sdhc with Smash Stack PAL on it
Go back to the stage builder- Hackmii Installer Loads
Install HBC, Bootmii, make a nand backup
Follow my softmod guide to fix
Guide: Softmod Any Wii
Your wii is alive
Disc Swap PWNS
What you need-
A game in your wii's region that will autoboot- Tested with Castlevania
The game must reset to the strap screen when it is reset via [HOME] on the wiimote [Reset] on the wii screen
Game that reset to the strap screen- many games maybe, you can test, Castlevania works
Game must be kind and load another game for you- Tested with Castlevania, I am sure there are others
Super Smash Bros. Brawl-PAL, 1:1 DVD9 iso
Most games will require you to load to the title screen, press [HOME] on the wiimote, swap discs, press [HOME] and the wiimote and go back to the title screen. Now listen to the wii drive, as soon as the drive clicks to spin up the disc, press [HOME], then click restart on the wii screen. The timing will be different for every game. Some games you can just restart, others need the spin up first.
Games that work-
Castlevania Judgment -with spin up
Dora- Crystal Kingdom -with spin up
BOOM Blocks Bash Party -with spin up
Carnival Games - no spin up
Family Party- 30 great games- with spin up.
Sonic Black Knight
Copy your Super Smash Bros. Brawl PAL ISO to /003
Copy your Swap Disc game to /003
Navigate to folder /003
Rename your Super Smash Bros. Brawl PAL ISO -> ssbb-pal.iso
Rename your swap disc game -> swap.iso
Run SwapDisc-PWNS.bat
Let wit do its thing
Code:
wit edit swap.iso --id=0SBE01 --name "SwapDisc-PWNS" --region USA --modify=DISC
wit edit ssbb-pal.iso --id=0SBE01 --name "SwapDisc-PWNS" --region USA --modify=DISC
Burn on good Media. Dual Layer media for ssbb-pal.iso, such as verbatim dvd + or minus. I have had good luck with verbatim dl dvd +r 8x and verbatim dl dvd -r 2.4x.
Burn with ImgBurn, @ 4x set the layer break to - 2084960
Burn swap.iso on a good dvd5 disc
Burn ssbb-pal.iso.iso on a good dvd9 dual layer disc
Use a gamecube controller and load the recovery menu using savemiifrii.
Insert your swap disc, let the game load to the title screen
Press [Home] on the wiimote, eject the swap disc
Insert SSBB-PAL
Now depending on the game, you could press restart or your may need to press [HOME] and load the game title screen again, then very very quickly press [HOME] again, then restart on the wii screen. It will be different for every game
For Castlevania- Load the title screen, Press [HOME], swap discs, press [HOME], wait 0.5-1sec, press [HOME], reset from the wii screen. Timing has to be right.
This should load the VC demo screen of SSBB, press [HOME] and restart again.
SSBB strap screen should load. Make a savegame.
Go to the stage builder, delete any custom stages you may have go back to the main title screen
Insert a standard sd card, 1-2g, non sdhc with Smash Stack PAL on it
Go back to the stage builder- Hackmii Installer Loads
Install HBC, Bootmii, and make a nand backup
Follow my softmod guide to fix.
Guide: Softmod Any Wii
Your wii is alive
Author: Mauifrog
What does this mean for your 003 wii? It can be fixed.
What you will need, 1:1 iso of SSBB-PAL
A game that installs a channel or A game that reboots to the safety screen
What you will do, load SSBB-PAL on your 4.2/4.3u/e/j 003 bricked wii
How will you load SSBB-PAL on your U/J wii? You will use Giantpunes mariokart pawns method.
A gamecube controller
A dvd drive capable of reading burned disc, or a wode (new wii dvd drives will not work, you may need to replace it.)
A modchip or a wode
Error 003 is caused by system menu 4.2/4.3+ and ios70/80 on region changed Korean wiis
The FIX- You need to install ios60-v6174 into ios slot 70, 80, 90. Then Never ever update from Nintendo again. Be sure to install priiloader to block updates. If you follow my softmod guide, your wii will be fixed when your done. Alternatively, you can use modmii to install the need patched ios.
Download- Smash-Stack.zip
Extract to a formated standard SD card 1-2g
SDHC will not work
4.2/4.3u 003 wiis- Download error 003-USA.zip
-Extract to your pc in folder 03
-Do MarioKart-PWNS or SwapDisc-PWNS
4.2/4.3j 003 wiis- Download error 003-JAPAN.zip
-Extract to your pc in folder 03
-Do MarioKart-PWNS or SwapDisc-PWNS
4.2/4.3e 003 wiis- Patch your SSBB-PAL.iso to autoboot with bootme
-Autoboot SSBB-PAL and run the smash stack.
-Hackmii loads, install HBC, bootmii, make a nand backup
-follow my Guide: Softmod Any Wii to fix
Mario Kart PWNS
This will allow you to load Smash Stack PAL on a non pal wii
You can do this via channel install
What you need-
A game in the region of your wii
The game must install a channel, that is not currently installed on your wii
Games that install channels- Mario Kart, Wii Fit, Rabbids Go Home
Mario Kart- tested and working
Wii Fit- not working for me
Rabbids Go Home- not working for me
Copy your Super Smash Bros. Brawl PAL ISO to folder /003
Copy your channel installing game to folder /003
Navigate to folder /003
Rename your Super Smash Bros. Brawl PAL ISO -> ssbb-pal.iso
Rename your channel installing game -> channel.iso
Run MarioKart-PWNS.bat
Let wit do its thing
Code:
wit mix channel.iso channel.iso ignore "@ignore.txt" select DATA as chan --dest disc1.iso --overlay
wit edit disc1.iso --id=0SBE01 --name "MarioKart-PWNS" --region USA --modify=DISC
wit mix disc1.iso header region ignore "@ignore.txt" ssbb-pal.iso select DATA as chan --dest disc2.iso --overlay
Burn on good Media. Dual Layer media for ssbb-pal.iso, such as verbatim dvd + or minus. I have had good luck with verbatim dl dvd +r 8x and verbatim dl dvd -r 2.4x.
Burn with ImgBurn, @ 4x set the layer break to - 2084960
Burn disc1.iso on a good dvd5 disc
Burn disc2.iso.iso on a good dvd9 dual layer disc
Use a gc controller to enter recovery menu via savemiifrii
Insert the channel disc, the game boots
Use your wiimote and navigate to the channel installer. Select to install the channel, it will tell you this channel uses so many block. When you get to the install confirmation, press [HOME] on the wiimote, eject disc1, insert disc2, press [HOME] on the wiimote, install the channel-
Super Smash Bros Brawl- VC demo menu will load, press [HOME] again, restart-
SSBB strap screen loads. Make a savegame.
Go to the stage builder, delete any custom stages you may have go back to the main title screen
Insert a standard sd card, 1-2g, non sdhc with Smash Stack PAL on it
Go back to the stage builder- Hackmii Installer Loads
Install HBC, Bootmii, make a nand backup
Follow my softmod guide to fix
Guide: Softmod Any Wii
Your wii is alive
Disc Swap PWNS
What you need-
A game in your wii's region that will autoboot- Tested with Castlevania
The game must reset to the strap screen when it is reset via [HOME] on the wiimote [Reset] on the wii screen
Game that reset to the strap screen- many games maybe, you can test, Castlevania works
Game must be kind and load another game for you- Tested with Castlevania, I am sure there are others
Super Smash Bros. Brawl-PAL, 1:1 DVD9 iso
Most games will require you to load to the title screen, press [HOME] on the wiimote, swap discs, press [HOME] and the wiimote and go back to the title screen. Now listen to the wii drive, as soon as the drive clicks to spin up the disc, press [HOME], then click restart on the wii screen. The timing will be different for every game. Some games you can just restart, others need the spin up first.
Games that work-
Castlevania Judgment -with spin up
Dora- Crystal Kingdom -with spin up
BOOM Blocks Bash Party -with spin up
Carnival Games - no spin up
Family Party- 30 great games- with spin up.
Sonic Black Knight
Copy your Super Smash Bros. Brawl PAL ISO to /003
Copy your Swap Disc game to /003
Navigate to folder /003
Rename your Super Smash Bros. Brawl PAL ISO -> ssbb-pal.iso
Rename your swap disc game -> swap.iso
Run SwapDisc-PWNS.bat
Let wit do its thing
Code:
wit edit swap.iso --id=0SBE01 --name "SwapDisc-PWNS" --region USA --modify=DISC
wit edit ssbb-pal.iso --id=0SBE01 --name "SwapDisc-PWNS" --region USA --modify=DISC
Burn on good Media. Dual Layer media for ssbb-pal.iso, such as verbatim dvd + or minus. I have had good luck with verbatim dl dvd +r 8x and verbatim dl dvd -r 2.4x.
Burn with ImgBurn, @ 4x set the layer break to - 2084960
Burn swap.iso on a good dvd5 disc
Burn ssbb-pal.iso.iso on a good dvd9 dual layer disc
Use a gamecube controller and load the recovery menu using savemiifrii.
Insert your swap disc, let the game load to the title screen
Press [Home] on the wiimote, eject the swap disc
Insert SSBB-PAL
Now depending on the game, you could press restart or your may need to press [HOME] and load the game title screen again, then very very quickly press [HOME] again, then restart on the wii screen. It will be different for every game
For Castlevania- Load the title screen, Press [HOME], swap discs, press [HOME], wait 0.5-1sec, press [HOME], reset from the wii screen. Timing has to be right.
This should load the VC demo screen of SSBB, press [HOME] and restart again.
SSBB strap screen should load. Make a savegame.
Go to the stage builder, delete any custom stages you may have go back to the main title screen
Insert a standard sd card, 1-2g, non sdhc with Smash Stack PAL on it
Go back to the stage builder- Hackmii Installer Loads
Install HBC, Bootmii, and make a nand backup
Follow my softmod guide to fix.
Guide: Softmod Any Wii
Your wii is alive
Author: Mauifrog
Monday, May 2, 2011
How Do I hack My Nintendo DS?
Simple,all you need is a flashcart.A flashcart is a cartridge pretty much like a dummy game cartridge with a micro SD slot.
How do i play backups?
1.First buy a flashcart,MAKE SURE IT WORKS ON YOUR SYSTEM FIRST!!(check flashcart manufacturers website/packaging) I would recommend either acekard 2i or supercard dstwo(great if you like emulators), original R4 (also great emulator support) are also very good if you can find one! but lack the support of the newer cards i mentioned.BUT LIKE I SAID MAKE SURE IT IS COMPATIBLE ESPECIALLY IF YOU HAVE DSI OR ABOVE
2.Download the latest flashcart firmware as explained in my guide
3.Buy yourself a micro SD card check the limitations on size on the flashcart packaging.
4.Format the micro SD to FAT32 (you will need an adapter to connect it to your pc)
5.Unzip the contents of the download using winrar or 7 zip (downloads available in guide)
6.Copy files to the root of the micro SD
7.Create a folder called NDS Games or Roms (it up to you what you call it) on your SD root
8.Copy you nds files (games/roms whatever you want to call them) to the folder you just created,just drag and drop.
9.Insert micro SD into flashcart.
10.Insert flashcart into DS
11.Your ds should autoboot to the flashcart firmware if you have a ds or dslite.If you have a dsi it will appear as a random game just press a to load it then your flashcart will boot
12.Select your game folder that you just created press a,then selet your game and press a to load it.Various options may be available in the way of game fixes you can access these usually by pressing y before loading on the selected game.It depends on your flashcart.
See the full guide here Softmod DS/DSLite/DSI Flashcart Firmwares
How do i play backups?
1.First buy a flashcart,MAKE SURE IT WORKS ON YOUR SYSTEM FIRST!!(check flashcart manufacturers website/packaging) I would recommend either acekard 2i or supercard dstwo(great if you like emulators), original R4 (also great emulator support) are also very good if you can find one! but lack the support of the newer cards i mentioned.BUT LIKE I SAID MAKE SURE IT IS COMPATIBLE ESPECIALLY IF YOU HAVE DSI OR ABOVE
2.Download the latest flashcart firmware as explained in my guide
3.Buy yourself a micro SD card check the limitations on size on the flashcart packaging.
4.Format the micro SD to FAT32 (you will need an adapter to connect it to your pc)
5.Unzip the contents of the download using winrar or 7 zip (downloads available in guide)
6.Copy files to the root of the micro SD
7.Create a folder called NDS Games or Roms (it up to you what you call it) on your SD root
8.Copy you nds files (games/roms whatever you want to call them) to the folder you just created,just drag and drop.
9.Insert micro SD into flashcart.
10.Insert flashcart into DS
11.Your ds should autoboot to the flashcart firmware if you have a ds or dslite.If you have a dsi it will appear as a random game just press a to load it then your flashcart will boot
12.Select your game folder that you just created press a,then selet your game and press a to load it.Various options may be available in the way of game fixes you can access these usually by pressing y before loading on the selected game.It depends on your flashcart.
See the full guide here Softmod DS/DSLite/DSI Flashcart Firmwares
Wii Softmod Guide For Any Wii
We're proud to announce that the Wii Softmod Guide by mauifrog has been published on Hacks Den. This is the most comprehensive hacking tutorial for the Nintendo Wii system and comes highly recommended Hacks Den and many other modding sites across the internet. The tutorial includes softmod methods for all Wiis including all system menus and special release versions. The best part about this guide is that it contains many fall back methods to repair a fully brick console.
What do you need before you start?
1. Nintendo Wii – Old, New, Any System Menu, Any Color, Any Region
2. USB SD Card Reader/Writer
3. Game Disc or Bannerbomb Exploit (exploit included in turoral)
4. 2GB Scandisk or Similar SD card
5. Ability to follow directions
Guide Summary
Chapter 1-Installing The HomeBrew Channel and Bootmii – This chapter covers installing the Homebrew Channel using the correct exploit for your system menu and making a backup of your NAND with Bootmii.
Chapter 2- Hacking Your Wii – In this chapter you will install 25 wad files that will enable your Wii to play most games from USB, virtual console games, homebrew games, backup game discs, and much more. In addition to the wads you will install an important brick protection tool called Priiloader. Priiloader is a menu you can access in the case your system menu is inaccessible in order to recover you Wii from a bricked state.
Chapter 3 - The Final Step – the final step to your softmod is actually using it so the pack in chapter 3 contains most of the Apps you’re going to need to get started.
Wii Softmod Guide Source
Wii Softmod Guide
What do you need before you start?
1. Nintendo Wii – Old, New, Any System Menu, Any Color, Any Region
2. USB SD Card Reader/Writer
3. Game Disc or Bannerbomb Exploit (exploit included in turoral)
4. 2GB Scandisk or Similar SD card
5. Ability to follow directions
Guide Summary
Chapter 1-Installing The HomeBrew Channel and Bootmii – This chapter covers installing the Homebrew Channel using the correct exploit for your system menu and making a backup of your NAND with Bootmii.
Chapter 2- Hacking Your Wii – In this chapter you will install 25 wad files that will enable your Wii to play most games from USB, virtual console games, homebrew games, backup game discs, and much more. In addition to the wads you will install an important brick protection tool called Priiloader. Priiloader is a menu you can access in the case your system menu is inaccessible in order to recover you Wii from a bricked state.
Chapter 3 - The Final Step – the final step to your softmod is actually using it so the pack in chapter 3 contains most of the Apps you’re going to need to get started.
Wii Softmod Guide Source
Wii Softmod Guide
Subscribe to:
Posts (Atom)